• Highlights
  • Specifications
  • Accessories
  1. Expansion enclosure for SAS to SAS RAID systems
    1. SAS drives for high performance and high reliability
    2. SATA drives for low cost and high capacity applications
  2. Highest density, 12 drives in 2U rack space
  3. Redundant or single JBOD controllers
  4. Two (2) SAS 4x wide ports per controller
  5. Diagnostics LED panel
  6. Proprietary enclosure service via connections (in-band) with the managing RAID enclosure
  7. Path redundancy via separate SAS domains (S12S-J1002-R)
Host-to-Drive Interface JBOD Model Corresponding
RAID Subsystem(s)		 Configuration Form Factor
Model Max. Connection
SAS to SAS S12S-J1000-G S12S-G1033
S12E-G1133
S12F-G1433		 4 JBODs Single Expander Controller 2U rack-mount
S12F-G1840 6JBODs
Host Interface
  1. Two (2) SAS 4x wide ports per controller.
  2. Proprietary enclosure service via in-band methodology
Drive Interface
  1. Twelve (12) hot swappable SAS disk drives
  2. MUX kits with port selectors for dual-controller access to SATA drives
System Components
  1. Redundant or single JBOD controller configurations
  2. Fault-tolerant modules interfaced through a common backplane
  3. Redundant, hot swappable 460W/530W power supply units
  4. Redundant, dual-speed cooling modules
  5. LED diagnostics panel
Management
  1. Management of multiple enclosures via RAID firmware and/or through GUI
  2. Module status LED indicators:
    1. Six (6) on LED panel (1 service LED and 5 status LEDs)
    2. Two (2) per drive tray
    3. Three (3) per controller module (1 Ready/Failed LED and two (2) Link status LEDs)
    4. One (1) per power supply unit
    5. Two (2) per cooling module
Power Supply Module
Specifications
Power Consumption 460W/ 530W (J1000-G/J1002-R)
Input Voltage 100VAC @ 8A/10A or 240VAC @ 4A/5A with PFC (auto-switching)
Frequency 50 to 60Hz/ 47 to 63Hz
Cooling Module
Specifications
Speed High or low rotation speed controlled by firmware
Max. Air Flow (each module) J1000-G: 1.3 m3/min (high speed); 0.9 m3/min (low speed)
Environmental Specifications
Humidity Operating: 5% to 95% (non-condensing)
Non-operating: 5% to 95% (non-condensing)
Temperature Operating: 0° to 40°C (32°F to 104°F)
Non-operating: -40° to 60°C (-40°F to 149°F)
Altitude Operating: Sea level to 3048m (12,000 ft.)
Non-operating: Sea level to 12,192m(40,000 ft.)
Dimensions
Dimensions With Forearm Handles
Height 88mm
Width 482mm
Length 516mm / 522mm
Package dimensions: 344/390(H) x 600/575(W) x 670/780(D) mm
System weight

Net Weight

 S12S-J1000-G 17.6 kg (38.80 pounds)

Gross Weight

 S12S-J1000-G 25.5 kg ( 56.22 pounds)

Spare Parts

IFT-9373S1DT2S1S 3.5" Hard disk drive tray w/MUX board, exclusively for dual-controller subsystems v1.2
IFT-9279CPSU Power Supply Module for ES S12S-J1002-R, 530W capacity
IFT-9275ECPSU Power Supply module for ES S12S-J1000-G, 460W capacity
IFT-9279CFanMod Cooling Fan Module, for ES S12S-J1002-R
IFT-9275CFanMod Cooling Fan module, for ES S12S-J1000-G
IFT-89S10J122 SAS to SAS JBOD controller module, 2 x SAS host ports
IFT-9270CmSASCab1 SAS external, Mini SAS 4x to Mini SAS 4x (SFF-8088) cable, 50cm, for S12S-J1002-R
IFT-9270CmSASCab3 SAS external cable, MiniSAS 4X(SFF-8088) to Infiniband 4X(SFF-8470, thumbscrew type), 50 Centimeters

Accessories

IFT-9279CDTray Hard disk drive tray, exclusively for the S12S-X1032 models (identified by a light-green release button).
IFT-9270CmSASCab2 SAS external, Mini SAS 4x to Mini SAS 4x (SFF-8088) cable, 120cm
IFT-9272CDTrayDmy Dummy Drive tray, Type-II bezel
IFT-9279CSlider36 Enhanced rackmount bracket assembly for EonStor S12S-J1002-R, 23" to 36" rack depth
IFT-9272CESlide28 Enhanced Slide rail assembly, for EonStor S12S-J1000-G, 21" to 28.5" rack depth
IFT-9272CESlide36 Enhanced Slide rail assembly, for EonStor S12S-J1000-G, 25.5" to 36" rack depth
IFT-9273S1N2S1S MUX board, 3.5" HDD, exclusive for SAS 3G drive side dual-controller subsystems, 5V only, Rev. 1.2