• Highlights
  • Specifications
  • Accessories
  1. SAS to SATA-II 3Gb RAID subsystem
  2. Two (2) Mini SAS 4x SFF-8088 host ports
  3. Hardware RAID5 and RAID6 engine by dedicated ASIC400 chipsets
  4. Automated Media Scan
  5. 12 or 8 SATA-II 3Gb disk drives
  6. NCQ and S.M.A.R.T. support
  7. Performance optimization per no. of I/O streams
  8. 64-bit LBA support
Host-to-Drive Interface Model Configuration Form Factor
SAS-to-SATA-II 3Gb A08S-G2130 Single 2U/8-Bay
RAID
  1. Hardware RAID5 & RAID6
  2. Supports RAID 0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60
  3. RAID Migration
  4. Configurable stripe size and write policy per logical drive
  5. Multiple Global, Dedicated, & Enclosure-specific hot-spares
  6. Automated Media Scan:
    1. In degraded mode: skips irreparable blocks to continue rebuild
    2. In normal operation: data-block verification and repair
Host Interface
  1. Mini SAS SFF-8088
  2. 4 PHYs per Mini SAS connector
  3. Concurrent I/O commands
  4. Tagged command queuing up to 1024
  5. Max. command queue up to 1024
  6. One external cable included: IFT-9270CmSASCab01: SAS external cable, Mini SAS 4x to Mini SAS 4x (SFF-8088), 50cm, w/ Ferrite Core. See more cabling options, please refer to the accessories page.
Drive Interface
  1. Twelve (12), or eight (8) hot-swappable drive trays
  2. Accommodates 1-inch pitch, 3.5-inch SATA-II 3Gb disk drives
  3. S.M.A.R.T. and NCQ support
  4. Automatic bad-sector reassignment
  5. Dedicated bandwidth to each connected drive
  6. Drive buffer on/off switch
System Components
  1. Heavy duty 2U enclosure
  2. Single RAID and I/O management controller module
  3. Fault-tolerant modules interfaced through a common backplane
  4. One (1) 256/512MB DDR DIMM module (default, supports up to 1GB in size)
  5. Redundant, hot-swappable 350W power supply units
  6. Redundant, dual-speed cooling modules
  7. Hot-swappable drive trays with anti-tamper locks
  8. Two (2) forearm handles
  9. Li-Ion battery backup unit (BBU-optional), life expectancy and charge level aware
Management
  1. COM1 serial port for local access to firmware-embedded utility
  2. COM2 for UPS serial connection
  3. GUI, Telnet, and SSH system monitoring via Ethernet
  4. Java-based SANWatch software
  5. Firmware-embedded manager via RS-232C (audio jack) that is platform independent
  6. Widest range of event notification methods including Email, LAN broadcast, fax, SNMP traps, SMS, and MSN
  7. LCD keypad panel to all configuration options
  8. Variable logical drive options per DIMM size
  9. Module status LED indicators:
    1. Two (2) per drive tray
    2. Seven (7) per controller module
    3. One (1) per power supply unit
    4. One (1) per BBU module
    5. Two (2) per cooling module
  10. Presence detect & thermal sensors via I 2 C bus

Physical/Electrical

Interfaces
  1. Mini SAS SFF-8088 external ports
  2. One (1) Fast Ethernet management port
  3. Two (2) serial COM ports (38400, n, 8, 1)
Power Supply Module

Redundant hot-swappable power supplies with PFC

Input 115VAC at 6A, 240VAC at 3A with PFC (auto-switching)
47 to 63Hz
Output Maximum output: 350 Watts
+12.0V 25A max.
+ 5.0V 25A max.
+ 3.3V 20A max.
Cooling Module

Redundant dual-thermal-fan cooling modules

Maximum air flow: 46 CFM (high speed); 31.8 CFM (low speed)
Environmental Specifications
Operating temperature: 5° to 40°C (35°C if battery is applied)
Non-operating temperature: - 40° to 60°C
Relative humidity: 5 to 95%, non-condensing
Operating altitude: Operating: 0 to 10,000 ft
Dimensions:
  1. Chassis without handles: 446(W) x 88(H) x 490(D) mm
  2. Chassis with handles: 482 (W) x 88(H) x 505(D) mm
  3. Package: 381H x567W x 772D mm
System weight
  1. Net weight: 23.5kg
  2. Gross weight: 25kg

Spare Parts

IFT-82AS21GE12 SAS-to-SATA RAID controller module, for EonStor A12S-G2130 subsystem, 2x (SAS 4x) host connectors
IFT-82AS21GE12M2 SAS-to-SATA RAID controller module, for EonStor A12S-G2130 subsystem, 2x (SAS 4x) host connectors, 256MB DDR RAM
IFT-82AS21GE08 SAS-to-SATA RAID controller module, for EonStor A08S-G2130 subsystem, 2x (SAS 4x) host connectors
IFT-82AS21GE08M2 SAS-to-SATA RAID controller module, for ES A08S-G2130 subsystem, 2x (SAS 4x) host connectors, 256MB DDR RAM
IFT-9272ChandR Right-side forearm handle for EonStor 2U series subsystems
IFT-9272CHandLLCD Left-side forearm handle for EonStor 2U series subsystems with an LCD keypad panel
IFT-9272CPSU Power supply module, for EonStor 2U series subsystems, 350W capacity
IFT-9272CFanModE Cooling fan module, for EonStor 2U DDR-interface subsystems
IFT-9373CDTray 3.5" Hard disk drive tray
IFT-DDRESCM2 256MB DDR RAM DIMM module
IFT-9011 Null modem, DB9 female to DB9 male, wires swapped
IFT-9270ASCab RS-232C serial cable, audio-jack to DB9
IFT-9270CmSASCab2 SAS external cable, Mini SAS 4x to Mini SAS 4x (SFF-8088), 120cm

Accessories

IFT-9272CDTrayDmy Dummy Drive tray, Type-II bezel
IFT-9270CmSASCab1 SAS external cable, Mini SAS 4x to Mini SAS 4x (SFF-8088), 50cm
IFT-9270CmSASCab3 SAS external cable, SFF-8088 to SFF-8470, 50 Centimeters
IFT-9270CmSASCab4 SAS external cable, SFF-8088 to SFF-8470, 120 Centimeters
IFT-9273CBTE Battery cell pack, Li-Ion, for ES Enhanced 3U/16-bay subsystems, BBU ID, high capacity
IFT-9270CUPSCab UPS cable, audio-jack to DB9
IFT-9272CESlide28 Enhanced slide rail assembly for EonStor 2U series subsystem, 25 to 28.5 inches rack depth
IFT-9272CESlide36 Enhanced slide rail assembly for EonStor 2U series subsystem, 25.5 to 36 inches rack depth
IFT-DDRESCEM5 512MB DDR RAM DIMM module
IFT-DDRESCEMA 1GB DDR RAM DIMM module